Optoma DLP D2+, User Manual

Page: 34 / 51

English 34
USING THE PROJECTOR
‡ Power Mode (Standby): Set the power mode setting.
‡ Active: Choose “Active” to return to normal standby.
‡ Eco: Choose “Eco.” to save power dissipation further < 0.5W.
‡ USB Power (Standby): Enable or disable the USB power function when the projector is in standby
mode.
Security
Configure security settings.
‡ Security: Enable this function to prompt for a password before using the projector.
‡ Off: Choose “Off” to be able to switch on the projector without password verification.
‡ On: Choose “On” to use security verification when the turning on the projector.
Note:
The default password is 1234.
‡ Security Timer: Can be select the time (Month/Day/Hour) function to set the number of hours the
projector can be used. Once this time has elapsed you will be requested to enter your password again.
‡ Change Password: Use to set or modify the password that is prompted when turning the projector on.
HDMI Link Settings
Note:
When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control them
on the same power on or power off status using the HDMI Link control feature in the projector’s OSD. This
lets one device or multiple devices in a group power on or power off via HDMI Link Feature in a typical
configuration, your DVD player may be connected to the projector through an amplifier or home theater
system.
HDMI
Amplifier
HDMI
DVD Player
‡ HDMI Link: Enable/disable the HDMI Link function.
‡ Inclusive of TV: If the settings is set to “Yes” then the power on and power off link options are
available.
‡ Power On Link: CEC power on command.
‡ Mutual: Both projector and CEC device will be turned on simultaneously.
‡ PJ

Device: The CEC device will be turned on only after the projector is switched on.
‡ Device

PJ: The projector will be switched on only after the CEC device is turned on.
‡
Power Off Link:
Enable this function to let both HDMI Link and projector to be automatically turned off
at the same time.
Test Pattern
Select the test pattern from green grid, magenta grid, white grid, white, or disable this function (off).
Remote Settings
‡ User1: Fixed on “Focus -”.
‡ User2: Fixed on “Focus +”.
‡ User3: Fixed on “HDMI3”.