opto engineering LTDVE4CH-20, Instruction Manual

Page: 58 / 69

57
LTDVE4CH-20 | INSTRUCTIONS MANUAL
Figure 17: the General setup web page
A password can be used to deny the modification of the settings to unauthorized personnel. In case
the password is set, it must be entered in the
Current password field. If the entered password
matches the saved password, the settings can be changed. In case the entered password does not
match the saved password, the settings are displayed but they cannot be changed. The password
can be modified in page
Advanced Setup (see chapter 14.3.8 ).
Maximum length for the password is eight characters. The password is cleared when the settings
are reset to the factory settings using the INIT button (see
chapter 11 for a description of the INIT
button functionalities).