7
A15.0908 Series
★
Install the eyepiece with cross ruler into the
right eyepiece tube, and insert the square pins of
the location ring into the square groove of the
eyepiece tube.
2-2-10
Connect the Power Cord
(1) Make sure the power switch is at “O” (OFF). (see
Fig. 13)
(2) Insert the connector
①
of light source group into
the power socket
②
of the microscope.
(3) Insert the aviation plug
③
into the aviation socket
④
of the microscope.
(4) Insert one end
⑤
of the power cord into the
microscope power socket
⑥
.
(5) Insert the other end of the power cord into the
power supply socket.
★
Cancel Step 3 for Transmitted Models, while
cancel Step 2 for Reflected Models.
★
Don’t use strong force when the power cord is
bended or twisted, otherwise it will be damaged.
★
Use the special wire supplied by our company.
If it’s lost or damaged, choose one with the same
specifications.
★
Connect the power cord appropriately to make
sure the instrument is connected to ground.
Fig.13
Summary of Contents for A15 0908 Series
Page 24: ......
