background image

www.cnoec.com.cn                                                                                                                                                              [email protected] 

 
 

INDEX 

A) Application                                                                                                              P.1 
B) Principle                                                                                                               

   

P.1 

C) Structure and Specification                                                                             

   

P.1 

1.  Eyepiece                                                                                                             

   

P.1 

2.  Objective                                                                                                                P.1 
3.  Mechanical Tube Length                                                                                    P.2 
4.  Conjugated Distance Between Object and Image                                   

   

P.2 

5.  Viewing Heads and Microscope Models                                                        P.2 
6.  Nosepiece                                                                                                           

 

  P.5 

7.  Mechanical Stage                                                                                         

       

P.5 

8.  ABBE Condenser                                                                                           

     

P.5 

9.  Focusing System                                                                                                  P.5 
10. Illumination System                                                                               

     

  P.5 

D) How to Use and Assemble                                                                                    P.6 
E) Trouble Shooting                                                                                                 

   

P.7 

1.    Troubles in Operating                                                                                 

 

     

P.7 

2.    Troubles in Optical System                                                                         

     

P.8 

3.    Troubles in Electric System                                                                         

     

P.8 

F) Maintenance and Care of Your Microscope                                                 

     

P.9 

G) Microscope with CCD Camera                                                                       

     

P.9 

H) Microscope with Camera                                                                               

     

  P.10 

I) Microscope with Electron Eyepiece                                                               

     

P.11 

J) A12.1303 Digital Microscope                                                                           

     

P.12 

Appendix A: Eyepieces and Objectives for Option                                     

   

P.12 

Appendix B: Digital Camera Head                                                                        P.13 

 

 

 

 

 

 

 

 

 

 

 

 

 

       

       

 

 

Summary of Contents for A12.1303




















Reviews: