Series
15
(last grid is "red" and the remaining seven grids
are "green"). (See Fig. 31, 32)
4-2
Assembling and using of the TV Device
Fig.33
Fig.34
(1)
Loosen the lock screw
①
of trinocular head,
take out the triplet dust-cover
②
. (See Fig. 33)
(2)
Take down the dust-cover of the TV
adapter
③
. Insert the TV adapter into the
trinocular head according to the figure and screw
down the lock screw
①
.
(3)
Loosen the lock-screw
④
of the TV adapter
③
.
Take down the vidicon interface (C type)
⑤
from
the TV adapter
③
, and screw into the external
camera
⑥
. Then install the interface with the
external camera
⑥
into the TV adapter
③
, and
screw down the lock-screw
④
.
(4)
At last insert the USB cable
⑦
into the
external camera
⑥
, and the other end into the
USB interface compliant with 3C, UL safety
certification of PC.
(5)
For binocular observation, after the image is
clear, view the output video through the
corresponding video capture analysis software. If
the image is unclear, rotate the TV adapter
③
for
focusing until it is clear.
★
The output terminal is designed as a USB
dedicated interface, 5V/500mA safety rated
working voltage
4-3
Assembling the Photography Device
Fig.35
(1)
Loosen the lock screw
①
of trinocular head,
take out the triplet dust-cover
②
(see Fig.34).
(2)
Insert the photography device into the
trinocular head as shown in the figure, and screw
down the lock screw
①
.
(3)
Loosen the lock-screw
③
of the photography
adapter and take down the photography adapter
④
(See Fig. 35).
(4)
Insert the 3.2X photography eyepiece
⑤
into
the eyepiece base
⑥
, then install the photography
adapter
④
and tighten the lock-screw
③
.
(5)
After the image is clear through observation,
then operate the photography device according to
its instructions.
