Series
14
Fig.30
(8)
Illumination: Rotate the adjustment knob
②
in clockwise, it will sound a “Dida” when the
LED fluorescence lamp is turned on, and
increase the brightness in clockwise; Rotate the
adjustment knob
②
in counterclockwise to
reduce the brightness of the LED fluorescence
lamp, and turn it off until it sounds a “Dida”.
(See Fig. 30)
★
When the LED fluorescence lamp is
turned on, also the LED fluorescence indicator
will be bright, which indicates the LED
fluorescence observation mode; the indicator
will be turned off when the LED fluorescence
lamp is off.
Fig.31
Fig.32
4-1-2
Use the Rechargeable Battery Box
(Recommended in power failure situation)
(1)
Insert on end of the power cable
①
into the
power socket
②
of the microscope back, then
insert the other end into the power output port
④
of the battery box(can be connected to either
output port), and ensure them be connected
well.(See Fig. 31)
★
Before connecting the power cable
①
,
firstly rotate the rechargeable battery box
switch
⑥
, the transmission power switch and
the reflection adjustment knob(with switch) to
“Off”(turn off).
(2)
Turn on the battery box switch
⑥
to start
powering the microscope. The indicator light
⑦
is “green” when the power is normally supplied,
and the indicator light
⑧
is "orange-yellow" (the
indicator light
⑧
is green after the electric is
full), while the last grid of the light bar indicator
⑨
is "red", and the remaining few grids are
"green". When the battery is low, the indicator
light
⑦
is “orange-yellow” and the indicator
light
⑧
is “orange-yellow”. At the same time,
the light bar indicator
⑨
only has the last grid of
red color. (See Fig. 32)
(3)
When the battery voltage is low, the battery
pack should be charged. Insert one end of the
power cord
③
into the battery box power socket
⑤
, and insert the other end into the power supply
outlet. When charging, keep the switch
⑥
at
"on" turned on state, and the indicator light
⑧
at
this time is "orange-yellow". When the battery is
fully charged, the indicator light
⑧
is green. At
the same time, the light bar indicator
⑨
is all on
关
