DVR Server Manual ver.6.05/rel.120909
59
3.5
Sensor setup
Press
button to set sensor parameters.
【
Sensor
NO
】
Select one sensor to be set.
【
Sensor
Name
】
Enter a description of the sensor.
【
Type
】
Select alarm type (sensor type) from
―NO‖(Normally Open) or
―NC‖(Normally Closed).
【
Policy
】
―Sensor Alarm Handling‖ handling policies will be available as
follows:
Audible warning - An audible indicator can be played.
Upload to DVR server - Update the alarm information to center.
Trigger alarm out - Trigger alarm box to output the alarm.
【
Trigger record camera
】
Set cameras to record when triggered by the
alarm. You can select one or more channels. When there is an alarm input,
the cameras will be triggered to record (the record type of the channel is
Alarm Record), and the monitor will switch to a preview of the cameras
(warning on monitor is enabled).
【
Preset
】
Set camera to move to a specified preset position when the
alarm happens.
【
Schedule
】
Set alarm input precaution time first, then set time segment
according to the sequence. The time of each segment should not overlap the
others and no breaks are allowed. After the precaution times of an individual
