DVR Server Manual ver.6.05/rel.120909
15
(2)
Modify IP camera
Press
button to modify IP camera
‘s information. The
interface is the same as the Add IP Camera interface.
(3)
Delete IP camera device
Click on the IP device that you which to delete and press the
button to delete a connected server. When the system is in processing to add
an IP camera device (
―connecting…‖ indicated in connect status column),
user can not delete that IP camera device and must
wait until ―connect fail‖ is
displayed.
(4)
Decode card work mode
DVR system supports playing video of IP Camera to a TV directly. It uses
the hard decoding function of decoder, so you should set the work mode of
decoder. If you
don‘t use hard decoding, you can‘t output video of IP Camera
real-time, user can only play back recording data to TV monitor by selecting
Note:
Each 4002MD card can decode 2 channels D1 or 4channels CIF.
Each 4004MD card can decode 4 channels D1 or 8 channels CIF.
When you select the work mode, system will send out corresponding
channels of IP cameras from the first IP camera. It will not influence soft
decoding for cameras of local board cards.
2.
Backup System Parameters
Select this function to export system configurations.
3.
Import System Parameters
Select this function to import system configurations.
