DVR Server Manual ver.6.05/rel.120909
46
2.5.1
SMTP setup
【
SMPT Server
】
SMTP server address, eg: mail.jstDVR.com
【
SMPT Port
】
Port that SMTP will listen for a connect request on.
【
Auth. Type
】
Logo
n mailbox, operator will select ―Simple Login‖ or
―None‖
【
Login User ID
】
Mailbox‘s ID.
【
Login Pass
】
Mailbox‘s password.
After you have finished setup you can press
to test the
function.
2.5.2
E-Mail setup
【
Send To
】
Set address of receiver.
【
Copy To
】
Option to an additional recipient.
【
User Email
】
Enter email address of sender.
【
Email Title
】
Enter subject of the E-Mail to be sent.
【
Grab Picture As Attachment
】
If enabled a snapshot will be sent as
an attachment with the alarm notification email. When disabled no attachment
will be sent.
【
Alarm
Send Email Cameras(Screenshot From Alarm Camera)
】
You
can select the cameras that will trigger an e-mail when there is an alarm. The
cameras you select are only the cameras of the local board card, IP Cameras
are not included.
【
Alarm
Send Email Sensors(Screenshot From Linked Camera)
】
You can select the sensor that will trigger an e-mail when there is an alarm.
*NOTE: If “Send the grab picture as the attachment”, you should check the alarm of the camera
or the sensor, and set “alarm send to network” to be enabled.
