IR Speed Dome User Manual
15
(2)
Click the PTZ control buttons and direction buttons to pan, tilt, call the presets or zoom
in/out the speed dome to draw a movement path. The speed dome can automatically
memorize the path you operated as a pattern.
(3)
Click
IRIS+
again to save the pattern and exit edit mode.
Notes:
1.
Remain Memo
indicates the remaining memory of the speed dome for configuring the patterns.
When it reaches 0, no more patterns can be configured. You can also see the remaining
memory shown under
PATTERNS
menu as
Space Remain
.
2.
The panning/tilting movements and the lens operations cannot be memorized simultaneously.
Preview the pattern
.
Enter the
PREVIEW
menu to preview the current pattern.
Delete Pattern
Click
IRIS+
to enter the
Delete Pattern
interface,
and click
IRIS+
to confirm the deletion.
Space Remain
Space remain refers to capacity of the speed dome to record the pattern
3.2.7
Configuring the Time Tasks
Purpose:
A time task is a scheduled dome action which can be configured to perform automatically at a
specific time.
Steps:
1.
Move the cursor to enter the
TIME TASK
interface:
MAIN MENUS > DOME SETUP > TIME TASK SETUP
2.
Choose the
Task Number
.
Steps:
(1)
Move the cursor to
TIMETASK SETUP
and click
IRIS+
to enter the edit mode.
(2)
Click the up and down direction buttons to select the number of the task which is to be
configured.
(3)
Click
IRIS+
again to confirm and exit edit mode of this column.
Note:
You can configure up to 8 tasks.
Figure 3-13
Time Task Configuration Menu
3.
Set the
Task State
.
Steps:
