IR Speed Dome User Manual
13
3.
Patrol Setup
.
Steps:
(1)
Move the cursor to
PATROL SETUP
and click
IRIS+
to enter the edit mode.
Figure 3-10
Edit the Patrol
(2)
Click up/down direction buttons to position the preset to be edited.
(3)
Click left/right direction buttons to position the cursor to
PRESET
,
DWELL TIME
and
SPEED
of
a preset. Click the up and down direction buttons to set each value.
Note:
The presets you set for a patrol should be the defined presets; dwell time (0-30 seconds
selectable) is the time that the speed dome pauses on the certain preset; speed (level 1-40
selectable, refer to Table 3-2) is the patrol speed the speed dome switching between the presets.
(4)
Follow above steps to define other presets for the selected patrol. You can configure up to
32 presets in sequence for a patrol. Press
IRIS+
to save the current settings or press
IRIS-
to
cancel and return to the previous menu.
Table 3-1
Patrol Speed
Level
Speed(°/s)
Level
Speed(°/s)
Level
Speed(°/s)
1
0.5
2
1.5
3
3
4
4.5
5
6
6
8
7
9.5
8
11
9
13
10
14.5
11
16
12
17.5
13
19
14
20.5
15
22
16
24
17
25.5
18
27
19
28.5
20
30
21
32
22
33.5
23
35
24
36.5
25
38
26
40
27
41.5
28
43
29
44.5
30
46
31
48
32
49.5
33
51
34
52.5
35
54
36
56
37
57.5
38
59
39
60.5
40
62
4.
Preview the patrol
.
Move the cursor to
PREVIEW
and click
IRIS+
to preview the current patrol and enable the speed
dome to scan among the presets.
5.
Delete a patrol
.
You can move the cursor to
CLEAR PATH
and click
IRIS+
to delete the current patrol.
