OP175 System Installation, Operation & Maintenance
3
The OP175 is an Advanced Membrane Separation System designed to purify water by removing dissolved
minerals and then add back a consistent amount of a balanced blend of TDS (Total Dissolved Solids), or mineral
content, in the treated water.
Getting To Know Your System
Feed water
Inlet
3/8” Push-To-
Connect -
Connect to Water Supply
Valve.
2@ CTO-Q10
Pre-Filters
PN: 300-05828
1@Mineral
Addition
Cartridge
PN: 300-05850
Water Quality Indicator -
Operates momentarily, push purple
button to turn on. Push “IN” button
for the TDS of the water going into
your equipment. Push “OUT” button
for the TDS of the purified water
from the membrane.
Emergency
Bypass Valve -
User can switch from
Optimized Water to
Untreated Water if
needed.
Optimized Water
To Storage Tank
-
3/8” Push-To-Connect
- Connect to Optimized
Water Storage Tank
Inlet
Operating
Pressure Gauge
Membrane Reject Water
Tubing Connection
AMS-QT15
Membrane
Cartridge
Reject Water Outlet
-
1/4” Push-to-Connect -
Connect to drain per local
regulations.
1
2
3
4
Optimized Water to
Storage Tank Inlet
-
3/8” Push-to-Connect
- Connect to Optimized
Water Outlet on OP175
processor.
Absolute 0.2 micron
Hydrophobic Air-
Breather/Filter
Repressurization
Assembly Outlet
-
1/2” Hose Barb -
Connect to Pressurized
Water Inlet on Processor
Repressurization Pump
120VAC -
Plug in to standard
wall outlet.
Buffer Tank -
Pre-charged
air bladder - 20 psi
Tank Inlet
Divert Valve
- Normally in Down
position. Turn handle to
Up position to divert Opti-
mized water to sample port.
Optimized Water
Storage Tank
- 16 gal. Atmospheric
Tank Repressurization
Return-
1/2” gray hose - Connect to
Repressurization Assembly
Outlet
Pressurized
Optimized Water
Outlet -
1/2” gray hose
-Connect to End User
Equipment
Sample Port -
3/8” Push-to-Connect - Used to
flush replacement filters, gather
water sample, measure production
or to drain water from storage tank.
Buffer Tank Valve
Normally open, shown
closed.
