OPTIMUM
M A S C H I N E N - G E R M A N Y
Maintenance
©
201
1
GB
Page 33
12 April 2011
version 1.0
S150 G Vario
Metal belt saw
6
Maintenance
In this chapter you will find important information about
•
Inspection
•
Maintenance
•
Repairs
of the metal belt saw.
NOTICE !
Properly-performed regular maintenance is an essential prerequisite for
•
safe operation
,
•
fault-free operation
,
•
long service life of the metal belt saw and
•
the quality of the products you manufacture.
Installations and equipment from other manufacturers must also be in optimum condition.
ENVIRONMENTAL PROTECTION
Make sure that liquids and oils are not spilt on the ground.
Clean up any spilt liquid or oils immediately using proper oil-absorption methods and dispose of
them in accordance with current legal requirements on the environment.
Collecting spillages
Do not re-introduce liquids spilt outside the system during repair or as a result of leakage from
the reserve tank: collect them in a collecting vessel to be disposed of.
Disposal
Never dump oil or other pollutant substances in water inlets, rivers or channels.
Used oils must be delivered to a collection centre. Consult your superior if you do not know
where the collection centre is.
6.1
Safety
WARNING!
The consequences of incorrect maintenance and repair work may include
:
•
Very serious injury to personnel working on the metal belt saw
•
Damage to the metal belt saw
.
Only qualified personnel should carry out maintenance and repair work on the metal belt
saw
.
Use the prescribed protection equipment.
6.1.1
Preparation
WARNING!
Only carry out work on the metal belt saw if it has been unplugged from the mains power
supply.
“Disconnecting the metal belt saw and making it safe“ on page 14
Position a warning sign.