OPTIMUM
M A S C H I N E N - G E R M A N Y
Assembly
©
201
1
GB
Page 21
12 April 2011
version 1.0
S150 G Vario
Metal belt saw
3.5
Installation and assembly
3.5.1
Site requirements
Organize the working space around the metal belt saw according to the local safety regulations.
INFORMATION
In order to provide for good functionality and high machining accuracy as well as long durability
of the machine the site should fulfill certain criteria.
Observe the following items:
•
The device must only be installed and operated in dry ventilated places.
•
Avoid places nearby machines generating chips or dust.
•
The site has to be vibration-free, i.e. at a distance from presses, planing machines, etc.
•
The substructure has to be appropriate for metal belt saw. Also make sure that the load bear-
ing capacity and the evenness of the floor are appropriate.
•
The substructure has to be prepared in a way that possibly used coolant cannot penetrate
into the ground.
•
Protruding parts such as stops, handles, etc. need to be secured by measures provided by
the customer if necessary in order to avoid dangers for persons.
•
Provide sufficient space for assembly and operating staff as well as for material transport.
•
Also allow for accessibility for setting and maintenance works.
•
Make sure that the mains plug of the turning machine is freely accessible.
•
Provide for sufficient illumination (minimum value: 500 lux, measured at the tool tip). In case
of little intensity of illumination provide for additional illumination i.e. by a separate workplace
illuminator.
INFORMATION
If a mains plug is fitted on the metal belt saw, it must be accessible.
3.5.2
Assembly
ATTENTION!
Danger of crushing and overturning.
Proceed with caution during the work described below.
The metal belt saw must be fitted on the machine stand by at least 2 people.
Assembling the machine stand
Fit the side panels of the machine stand with the fitting tools supplied.