Maintenance
Version 2.1.1 - 2020-07-27
42
Translation of original instruction
B40 GSP
EN
B40G
SP_
GB_5
.f
m
First after 200
operatingm
hours, then
every 2000
operating
hours
Drill
h
e
ad
C
h
an
gin
g
the o
il in
th
e ge
ar for the
s
p
ind
le
s
le
eve
fee
d
For oil change use an appropriate collecting tray of sufficient
capacity.
Unscrew the screw from the drain hole.
Img.6-6: Oil filling screw
Re-fills the gear of the spindle sleeve feed with gear oil.
Approx. consumption 0.5 litres.
Pay attention to the correct level.
Img.6-7: Changing the oil in the gear for the spindle
sleeve feed
Every month
Drill
colu
mn
an
d too
the
d rac
k
Lu
br
ic
ate
Oil the drilling column in regular intervals using standard oil.
Lubricate the rack regularly with commercial grease (e.g. fric-
tion bearing grease).
as required
Co
olan
t eq
uip
m
en
t
Coolant pump
The coolant pump is maintenance-free.
Cooling lubricants and tanks on page 44
Inspection plan for water-mixed cooling lubricants on page 45
Rinse the coolant pump if you use coolants that leave residues.
Interval
Where?
What?
How?
Oil filling screw