17
CLEANING
Body Cleaning
1. Do not immerse the machine in the water. Do not use water to shower directly on
top of the machine to prevent water from getting into the machine body to avoid short
circuits, electric shock, leakage, rust, and other failures.
2. Do not use a dripping wet towel to wipe the machine
3. Do not use detergent/vinegar/salt and other corrosive, strongly acidic, strong alkaline
cleaning products to clean the machine body, to avoid damaging the machine's surface.
4. Do not use sharp and rough tools such as wire balls to brush the accessories.
Otherwise, it is easy to damage the surface of the accessories.
Accessory Cleaning
1. Do not put the cast aluminium parts into the dishwasher or wash them with corrosive,
strongly acidic, or alkaline cleaning products. Please do not put them into the
dishwasher for cleaning. (Except for stainless steel parts or surface-treated Teflon parts
and electrophoresis parts)
2. Do not soak in detergent, salt water, vinegar, and other corrosive liquids; use warm
soapy water to clean accessories, rinse well and dry thoroughly before next use.
Special Cleaning
1. The rotating output shaft will produce a bit of black residue due to high speed and
friction when the machine is working. After each use, please clean it promptly with a
damp cloth and keep the area dry.
2. Pay attention to the sharp blade and related sharp edge parts of accessories.
Preservation and
maintenance
When not in use, you can cover the machine with a packaging bag and place it in a dry
environment.
ELECTRICAL SHOCK HAZARD
ALWAYS BE SURE TO UNPLUG MIXER BEFORE CLEANING
TO AVOID POSSIBLE ELECTRICAL SHOCK.
Wipe mixer with a damp cloth. DO NOT IMMERSE IN WATER.
Wipe off beater shaft frequently, removing any
residue that may accumulate.
WARNING