OPTIMUM
M A S C H I N E N - G E R M A N Y
Operation
©
201
0
US
Page 23
Stand 27 / 08 / 2010
Version 1.0.6
BF 30 Vario
Mill Drill
4
Operation
4.1
Safety
Use the mill drill only under the following conditions:
The mill drill is in proper working order.
The mill drill is used as prescribed.
The operating manual is followed.
All safety devices are installed and activated.
All problems should be eliminated immediately. Stop the mill drill immediately in the event of any
problem in operation and make sure it cannot be started-up accidentally or without authorisation.
„For your own safety during operation“ on page 12
4.2
Control and indicating elements
Fig. 4-1: BF 30 Vario
Selector switch for gear-
box stage
Right clamping screw of
mill drill head
Star grip for spindle sleeve
feed
Activation of the fine cross-
feed
Fine crossfeed of spindle
Crank for height adjust-
ment of mill drill head
Cover of draw-in rod
Control panel
Digital display
fine crossfeed of spindle
Clamping lever of
spindle quill
Rule with scale
