OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
©
201
0
US
Page 7
27 / 08 / 2010
Version 1.0.6
BF 30 Vario
Mill Drill
1.2
Proper use
WARNING!
In the event of improper use, the mill drill
•
will endanger personnel,
•
will endanger the mill drill and other material property of the operator,
•
may affect proper operation of the mill drill.
The mill drill is designed and manufactured to be used for milling and drilling cold metals or
other non-flammable materials or that do not constitute a health hazard by using commercial
milling and drilling tools.
The mill drill must only be installed and operated in a dry and well-ventilated place.
If the mill drill is used in any way other than described above, or modified without authorization,
then the mill drill- is being used improperly.
We do not take liability for damages caused by improper use.
We would like to stress that any modifications to the construction, or technical or technological
modifications that have not been authorized will also render the warranty null and void.
the maximum values for the mill drill are complied with,
the operating manual is observed,
inspection and maintenance instructions are observed.
„Technical data“ on page 14
WARNING!
Very serious injury due to improper use.
It is forbidden to make any modifications or alterations to the operating values of the mill
drill. These could endanger the staff and cause damage to the mill drill.
1.3
Possible dangers caused by the mill drill
The mill drill was built using the latest technological advances.
Nonetheless there remains a residual risk, since the mill drill operates with
high revolutions,
rotating parts and tools,
electrical voltage and currents.
We have used construction resources and safety techniques to minimise the health risk to the
staff resulting from these hazards.
If the mill drill is used and maintained by personnel who are not duly qualified, there may be a
risk by the mill drill resulting from incorrect operation or unsuitable maintenance.
All personnel involved in assembly, commissioning, operation and maintenance must
be duly qualified,
strictly follow this operating manual .
Disconnect the mill drill from the electrical power whenever cleaning or maintenance work is
being carried out.
