Optimum 3338438, Operating Manual

Page: 14 / 57

Technical data
OPTIMUM
M A S C H I N E N - G E R M A N Y
27 / 08 / 2010 Page 14 Technical data Mill Drill BF 30 Vario ; Version 1.0.6
©
20
10
US
2 Technical data
The following information gives the dimensions and weight and is the manufacturer’s authorised
machine data.
2.1 Power Supply
Motor 3 HP, 230V, 1Ph, 60Hz
2.2 Milling-drilling capacity
Drilling capacity in steel 24 mm /0.9" max. diam.
Drilling capacity cast iron 28 mm /1.1" max. diam.
Milling capacity of end-mill cutter 30 mm /1.2" max. diam.
Milling capacity of inserted tooth cutter 75 mm /2.9" max. diam.
Swing 440 mm /17.3"
2.3 Spindle holding fixture
Spindle holding fixture R8
Extraction rod (Draw bar) M12
Qill travel 90 mm /3.5"
2.4 Mill drill head
Swivelling + / - 90°
Gearbox stages 3
Z-axis travel 470 mm /18.5"
2.5 Cross table
Table length 750 mm /29.5"
Table width 210 mm /8.3"
Y-axis travel 200 mm/7.9"
X-axis travel 450 mm /17.7"
T-slots 1/2" slots, three
2.6 Work area
Height 2100 mm /82.7"
Depth 1900 mm /74.8"
Width 2500 mm /98.4"
Total Weight 265 Kg. /584 lbs
2.7 Speeds
Gearbox stage low 80 - 1100 RPM
Gearbox stage middle 160 - 1700 RPM
Gearbox stage rapid 320 - 3100 RPM