Version 1.0.2 - 2020-09-15
23
Translation of original instructions
GT25 | GT30 | GT40
EN
GT25_G
T30_G
T40_G
B_3.
fm
3.2
Assembly and commissioning
INFORMATION
The surface grinding machine is pre-assembled. The delivery takes place in several transport
boxes. After unpacking and transport to the installation site, individual components of the sur-
face grinding machine must be assembled and joined together.
3.3
Unpacking the machine
Install the machine close to its final position before unpacking. The machine is delivered in sev-
eral packages. If a package shows signs of possible transport damage, take appropriate pre-
cautions not to damage the machine when unpacking. If damage is discovered, the carrier and/
or shipper must be notified immediately so the necessary steps can be taken to register a com-
plaint.
Examine the complete machine carefully and check whether all materials, such as shipping
documents, instructions and accessories have been delivered with the machine.
3.3.1
Standard accessories
Electromagnet on grinding table
external hydraulic power unit with oil cooler
Table enclosure as splash guard when used
Levelling feet, set screws and lock nuts
Test report machine accuracy
Operating instructions in printed form
3.3.2
Optional accessories:
Magnetic filter and paper band filter, article no. 3112000 MPS1
3.3.3
Load stop in unpacked condition
The machine can be lifted underneath the machine base with a forklift or pallet truck. For trans-
port, the surface grinding machine must be secured on the loading area in accordance with reg-
ulations. All loose parts must either be firmly attached to the machine, separately secured or
stowed in a separate, secure container.
The surface grinding machine may only be loaded and unloaded by qualified personnel.
Loading and unloading using a forklift truck: The machine may only be lifted by the base frame.
Pay attention to the indicated weight and the load centre of gravity.