Optimal 1700, Manual

Page: 6 / 43

- 5 -
2. Assembly
IMPORTANT: When doing assembly work, heed relevant
instructions of manufacturers of power unit!
2.1 Back Plate
The tree spade is attached to the power unit by means of a back plate.
The back plate is procured from the manufacturer of the power unit,
or it might be fabricated according to the drawings and instructions of
the manufacturer of the power unit.
The back plate is to be furnished with borings as per drawing page 13.
At these attachment points the tree spade is bolted tightly to the back plate.
2.2 Installation of Electro-Hydraulic Control (wiring diagram page 14/15)
2.2.1 Install control box at suitable place in the cabin, e.g. at dashboard
2.2.2 Install 13-pole socket next to the push-on connector for the implement hydraulics.
A mounting bracket has been provided.
2.2.3 Run 12-pole cable from control box to 13-pole socket.
2.2.4 The control box must be connected to the power supply (12V) of the power unit.
Important: Electric power should be flowing only when the ignition of the power
unit is activated, otherwise the battery may run down.
Maximum power input 12 Ampere !
Now the tree spade is ready for operation.