PULSAR Minimal Stress
Installation and operating Manual
OPTIKON 2000
Cod. 111001EN
2012-02-16 Rev.J
8-13
8.6 FOOTSWITCH
A SPLASH-PROOF footswitch allows the surgeon to control various modes of
instrument operation. The footswitch connects to the rear panel of the control
console (Fig.3, No.5).
The PULSAR unit can be programmed to use the footswitch 112101. The footswitch
can be used in a single or double linear (for right-handed and left-handed people),
MMP, and IVP modes. The functions that can be activated in each mode are
summarized in the following paragraphs.
To select a different pedal, touch the <PROGRAM MODE> soft key on the function
main screen. The program screen will be displayed. In the middle box under
"FTSWTCH" appears the list of the available pedals; at this point select the desired
pedal by means of the <UP> and <DOWN> arrow keys on the front panel next to the
pedals window (below). Touch the <DONE> key to return to the function main
screen.
To definitively store the selected pedal in the program, refer to section 8-7
Program and pedal selection
Program
selection
Footswitch
selection
