PULSAR Minimal Stress
Installation and operating Manual
OPTIKON 2000
Cod. 111001EN
2012-02-16 Rev.J
4-1
4.
SYMBOLS
Table shown below reports some I.E.C. approved symbols and their meanings. In
the absence of sufficient space, these symbols are often used on medical
instruments to enable quick and simple communication of information and warnings.
At times two or more symbols are combined together in order to obtain special
meanings.
These are the symbols used on the PULSAR label. Before using the unit, familiarize
yourself with the symbols and definitions provided in the table.
SYMBOLS PUBLISHED BY IEC
SYMBOL
DESCRIPTION
MANUFACTURER (AND DATE OF
MANUFACTURE, WHERE APPLICABLE)
ALTERNATING CURRENT
DIRECT CURRENT
EQUIPOTENTIALITY
WARNING
ON (POWER: CONNECTION TO THE
MAINS)
CLOSED (CONNECTED TO MAINS)
TYPE B APPLIED PART
TYPE BF APPLIED PART
SEPARATED WASTE COLLECTION FOR
ELECTRICAL/ELECTRONIC EQUIPMENT
RF EMISSION
SEE OPERATING INSTRUCTIONS
