PULSAR Minimal Stress
Installation and operating Manual
OPTIKON 2000
Cod. 111001EN
2012-02-16 Rev.J
8-2
NOTE:
Adjusting a parameter will not undo the default parameters. To recall the default parameters or to
permanently store the new settings in the machine memory, see paragraph "8.7. TO RECALL OR
STORE A PROGRAM".
5)
When diathermy is activated by depressing footswitch, diathermy power is
delivered to the handpiece and an audible tone of continuous pitch is
automatically generated to alert the operator.
6)
Excessive diathermy for the level of power selected could indicate a fault. In
this case, stop using the system at once.
NOTE:
The diathermy system is complemented by a comprehensive range of ancillary equipments including
bipolar pencil erasers, microforceps and various probes tailored to surgeon specific requirements.
