Optikinetics FG2080AGW, Manual, Page: 6 / 11

Use the projector’s bracket to mount the projector in any of the following ways:
CAUTION: Never operate the projector in a position where the air
vents can be blocked

Ensure that the projector is secured to a surface or structure able to bear the weight
of the projector and accessories, via the bracket fitted using suitable central bolt
(minimum: 14mm M10 x 20mm), washers and attachments.

For added strength in a fixed position on a flat surface, use the bracket as a marking
template for drilling fastening holes. Use a minimum of 2 fasteners such as 2 x 40mm
No 10 wood screws.

A safety chain or cable must be fitted to the projector and secured to an immovable
object.

The mounting point must be able to support the weight of the projector should it fall.
Adjust the angle and position of the effects projector using the knob which connects the
bracket to the unit. Loosen the securing lever and move bracket to the desired position.
Tighten lever securely. To adjust the position of the lever press the central button, pull lever
away from the projector, turn to the desired position and release.