Optikinetics FG2080AGW, Manual, Page: 10 / 11

14. Care and Maintenance

Always switch the projector off, unplug and allow to cool before moving, storing and
before all maintenance e.g. changing a fuse. If storing, wrap the cable loosely around
the projector once completely cool.

The focusing lens should only be cleaned with a dry cloth, ensuring the fans are free from
dust.

Use a soft tissue or lens cloth with a little methylated spirit or pure alcohol to clean the
focusing lens.

Do not attempt to open the projector and never touch the LED module - it may fail if
touched.

For any repairs, please contact ROMPA®. Do not attempt to repair this product yourself.

Once this product is eventually exhausted, please dispose of it responsibly and
appropriately.

To change the fuse: switch off, unplug, and replace the fuse with a new fuse of the same
specification (T1AH/250V Ceramic 20mm x 5mm diameter). The fuse is located in the
rear IEC panel. Prise out the fuse holder with a flat ended screwdriver. Refit the fuse
holder and push in until it is flush with the surface of the IEC socket panel. If the fuse fails
immediately, contact ROMPA® - do not use a fuse with a higher value.