Optikinetics FG2080AGW, Manual, Page: 2 / 11

7. Best Use
This product looks most effective in a darkened environment. Projections can be made
even more visually striking when used with compatible products.
8. Compatible ROMPA® Products
The LED Projector must be used with an accessory in the rear gate, typically a Wheel
Rotator:
22613 Wireless Standard Wheel Rotator
22614 Wireless Magnetic Wheel Rotator
This projector cannot be used with the Magnetic Wheel Rotator 22335 nor the Standard
Wheel Rotator 13170 as both these types of Wheel Rotators have a short cable from the
motor that has a 2-pin plug on the end. LED Projectors supplied from January 2017
onwards no longer have two pin sockets towards the front of the projector – there is no
socket to plug these older Wheel Rotators into. Each new Wireless Wheel Rotator turns
the Effect Wheel automatically.
An Effect Wheel must be used in the Wheel Rotator e.g. 22365 Underwater, 22370 Sensory etc.
Please see
www.rompa.com for our extensive range of themed Effect Wheels.
Further accessories may be used with the Effect Wheels to move or multiply the effects
e.g. 22636 Panoramic Rotator, Clip on Prism 19934. The previous model of Panoramic
Rotator 14024 is not compatible with new Projectors.
Only use accessories intended for this projector – use of an accessory not recommended
by the manufacturer could cause an accident, injury or damage. If in doubt, contact
ROMPA® for advice.
This projector can be operated using switches connected to the 3.5mm jack sockets on the
rear of the projector. ROMPA® offers a range of suitable switches.
Please see
www.rompa.com for our range of projector accessories and switches.
9. Starting Up

It is highly advisable that you read the full instructions before use.

Choose a suitably safe location.

Install securely using appropriate fixings.

Place a Wireless Wheel Rotator with a wheel into the rear gate.

Plug in power cord.

Switch on – the appliance power switch has the symbols “O” for off and “I” for on.