Optikinetics FG2080AGW, Manual, Page: 4 / 11

12. Technical Specification
Size:
34.7L x 13.3W x 10.2cmD (22.8cm including bracket)
Power Rating: 62 Watts maximum
Voltage: 220-240V~ or 110-120V~ 50/60Hz
12VDC Output Current: 500mA maximum
Light:
40W LED Module
Average LED Module life 100,000+ hours
Weight: 3.2kg
Lumens: 850 lumens (on screen)
Colour : Colour temperature 4000° K
Cooling: Tubeaxial fan
Standard lens: 3 element 85mm f2.8 42.5mm Helical Focus Groove
Operating: Ambient temperature 10 to 35°C
Relative humidity 80%rH max.
Mains fuse: T1AH/250V ceramic (20mm x 5mm diameter)
Control inputs: 3.5mm mono or stereo jack plugs
13. Installation
Choose a suitable location for the projector, bearing in mind the following:

Install indoors in dry environments only.

This product requires one electrical socket.

Make sure the projection will be onto a suitable surface – a surface free of objects
and that is white or pale in colour.

The projector is a visual product and should not be handled. However, you may wish
to access the projector periodically to change effects.

There must be unrestricted airflow around the projector, especially around the air
inlet grille.

If an extension cord is necessary, a cord with a current rating at least equal to that of
the appliance must be used. Cords rated for less amperage than the appliance may
overheat.

The projector must always be connected to a grounded (earthed) electricity supply.

Only connect to a power supply with a voltage corresponding to that printed on the
projector. Use the adapter fitting that is appropriate to the country where the
projector is being used.

Do not use the projector at an angle of more than 90° from horizontal as this may
cause an effect or effect accessory to separate from the projector, fall and break
which may also cause injury.