Page 10
7. Assembling
7.1 All models
1.
Remove the dust protection cap from the eyepiece sleeve
and insert the eyepiece into the empty eyepiece sleeve. (Fig.
1)
F
Fig. 1
ig. 1
F
Fig. 2
ig. 2
F
Fig. 3
ig. 3
7.1.1 OS-A / OS-C Series
Insert the power supply jack in the socket
①
placed at the rear
side of the microscope. (Fig. 2)
7.1.2 OS-B Series
Insert the power cord in the socket placed at the rear side of the
microscope.
7.2 OS-B3
1.
Remove the dust protection cap of the photo tube.
2.
Insert the “Eyepiece Linker”
②
. (Fig. 3)
3.
Insert the projection lens in the empty hole of the Eyepiece
Linker.
• The camera will not be in focus if the Eyepiece Linker is
not used.
①
②
F
Fig. 4
ig. 4
7.3 OS-C3
1.
Unscrew the locking screw
③
on the right side of the photo
port and remove the dust protection cap. (Fig. 4)
2.
Insert the photo tube
④
in the empty hole and lock the screw.
3.
Insert the projection lens in the empty hole of the photo tube.
③
④
