Page 3
2.0 unPACKInG And ASSEMBLY
The multidiscussion system is housed in a moulded Styrofoam container. Remove the tape from the edge of
the container and lift the upper part of the container. Take care not to let optical items fall out end get dam-
aged. Remove each part from the housing and place them of a sturdy table.
2.1
Install the microscope as indicated in the specific instruction manual. Do not install the observation
head.
2.2
Place the splitter attachment of the multidiscussion system
and tighten the lock screw on the right side of the microscope
(Fig. 1).
2.3
In order to use the green arrow which will be used as
In order to use the green arrow which will be used as
a pointer, it is mandatory to turn on the main switch
of the microscope body. Connect one terminal of the
provided cable into the back side of the splitter and the
other terminal into the connector placed of the upper
part of the microscope. (Fig. ). Now use the pointer
position controller (1) or the pointer intensity controller
() to adapt to specific needs position and intensity of
the pointer.
Fig. 1
Pointer position control-
ler (1)
Pointer intensity control-
ler ()
Fig.
