Page
Fig. 6
2.4
Begin to place the connection tubes on both sides of
the splitter attachment. Firmly screw the black ring
nut. (Fig. 3-).
«
Every connection is identified by a letter printed on
both sides of the connection. Make sure to match
the letters in order to correctly assemble the micro-
scope..
2.5
Repeat the same procedure on the other side of the
splitter (in case of B-500Ti-5)
2.6
Insert the second part of the extension tube (Fig. 6).
«
At the end of the first extension tube there is a lens
(Fig. 5). Make sure it is free from dirt, dust or other
contaminants before to proceed with the assem-
bling of the second extension tube.
2.7
Fully insert the second extension tube in the right posi-
tion. Using the provided Allen wrench (small one) lock
the fixing screws (1) to block the extension tube (Fig.
6).
Fig. 3
Fig.
Fig. 5
(1)
2.0 unPACKInG And ASSEMBLY
