OPTIKA MICROSCOPES XDS-3 MET, Operation Manual

Page: 14 / 44

Page 1
5.0 MAInTEnAnCE
Hold to the bulb by wrapping it with a cloth or using gloves. Do not touch the halogen bulb with bare
hands.
Please insert the lamp gently. The lamp may be damaged by excessive pressure.
See section 3 for more information.
Replacing the fuse
Before replacing the fuse, turn the main switch (4) to “0” (off) and unplug the power cable.
rotate the fuse support out of the holder using a straight screwdriver. Insert a new fuse in the support,
then rotate the support back into the holder.
Fuse rating: 0V, 3.1A.
HEAd TrInOCuLAr, 30° InCLInED, 30° rOTATIng
EYEPIECE WF10x/MM HIgH - POInT
nOSEPIECE POSITIOnS
OBjECTIVES LWD PLAn IOS MET (nO COVEr SLIDE) IOS x/0.1, 10x/0.,
0x/0., 0x/0.
MAGnIFICATIOnS 0x, 100x, 00x, 00x
FOCUSInG SYSTEM COAxIAL COArSE AnD FInE
STAGE 0x30MM; MECHAnICAL STAgE WITH LOWErED ErgOnOMIC
COAxIAL COnTrOLS.
x-y rAngE: 11x1MM.
dIAPHRAGMS FIELD AnD APErTurE DIAPHrAgMS (CEnTrABLE).
ILLUMInATIOn 1V/0W HALOgEn BuLB In ExTErnAL CASE. CEnTrABLE BuLB
AnD BrIgHTnESS COnTrOL.
FILTERS BLuE, FrOSTED, POLArIzEr & AnALySEr.
OPERATIOn EnVIROnMEnT
InDOOr uSE.
ALTITuDE: MAxIMuM 000 M.
TEMPErATurE: °C~0°C (1°F~10°F)
MAxIMuM rELATIVE HuMIDITy: 0% AT 31°C (°F), THEn LInEAr
DErATIng:
0% AT 3°C (3°F), 0% AT 3°C (10°F), 0% AT 0°C (10°F).
POLLuTIOn DEgrEE: (rEFEr TO IEC0).
6.0 TECHnICAL SPECIFICATIOnS