Page 6
5.0 MAInTenAnCe
5.1 Microscopy environment
This illuminator stand is recommended to be used in a clean, dry and shock free environment
with a temperature of 0-40°C and a maximum relative humidity of 85 % (non condensing).
use a dehumidifier if needed.
5.2 To think about when and after using the microscope
•
The microscope should always be kept vertically when moving it and be careful so that no
moving parts, such as the eyepieces, fall out.
•
never mishandle or impose unnecessary force on the microscope.
•
never attempt to service the microscope or stand yourself.
•
After use, turn off the light immediately, cover the microscope with the included dust-cover,
and keep it in a dry and clean place.
5.3 electrical safety precautions
•
before plugging in the power cable with the supply, make sure that the supplying voltage of
your region matches with the operation voltage of the equipment and that the On/OFF switch
is in OFF position.
•
users should observe all safety regulations of the region. The equipment has acquired the CE
safety label. however, users do have full responsibility to use this equipment safely.
6.0 TeCHnICAL SPeCIFICATIOnS
Input Voltage
110 – 240Vac 50Hz
eYepIece
100mm dIameter plate. led matrIx IllumInator.
color: cool WHIte 6300K. BrIgHtness adjustaBle.
IncIdent
IllumInator
led matrIx IllumInator. color: cool WHIte 6300K.
BrIgHtness adjustaBle. angle adjustaBle.
stand dImensIons
W x l x H: 330mm x 285mm x 305mm
Focus moVement
racK & pInIon mecHanIsm.
st-155: coarse Focus.
st-156: coarse and FIne coaxIal Focus.
