Optika Italy SZ-STL1, Instruction Manual

Page: 48 / 312

Page 48
10. Microphotography
①
②
①
②
F Fig. 80 ig. 80
F Fig. 81 ig. 81
F Fig. 82 ig. 82
③
④
①
②
③
④
10.1 Installing the C-mount adapter
1. Loosen the clamping screw
①
on the trinocular port and re -
move the dust cap
②
. (Fig. 80)
2. Screw the C-mount adapter
③
to the camera
④
and insert
the round dovetail of the C-mount into the empty hole of the
trinocular port (Fig. 81), then tighten the clamping screw
①
.
10.2 Use of reflex cameras
1. Insert the Reflex adapter
①
into the relay tube
②
.
2. Screw the “T2” ring
③
(not provided) to the reflex adapter.
3. Connect the Reflex camera
④
to the “T2” ring just installed.
(Fig. 82)
4. Mount the other end of the relay tube
②
into the empty hole
of the trinocular port, then tighten the clamping screw. (Fig.
80)
• “T2” ring is not provided along with the microscope, but is
commercially available.
• While shooting dark specimens, darken eyepieces and view -
finder with a dark cloth to minimize the diffused light.
• To calculate the magnification of the camera: objective mag -
nification * camera magnification * lens magnification.
• When using an SLR camera, mirror movement may
cause the camera to vibrate.
• We suggest lifting the mirror, using long exposure times
and a remote cord.