Eyepieces • SDLv2 • HDF • HR
Product Code
Magnification
Eye Relief (mm)
40936P
7-21x
20-18
40810P
8x
22
40831P
11x
16
40861P
33x
16
40862P
7-21x
22-17
40930P
9x
18
40931P
11x
17
41145P
8-24x
20-16
Getting Started
Eyepieces
An eyepiece needs to be attached to the travelscope before use. The body has both internal and external
eyepiece connection threads to match Opticron HR2/3, HDF & SDL eyepieces.
Use the switch marked “ON/OFF” on the top of the scope body to activate and de-activate the image
stabilisation. When powered on, a green LED on the eyepiece end of the scope body will illuminate. The
image is focused by rotating the ring at the far end of the objective lens housing. If you are using a zoom
eyepiece, magnification is adjusted using the zoom ring on the eyepiece.
Please note that the stabilisation will NOT power off automatically so should be switched off manually when
not in use. When battery power is exhausted the scope can still be used without image stabilisation.
WARNING. Never under any circumstances use a travelscope to view the sun. Doing so will cause serious
damage to your eyes.
