
Opticon
NLV 2001
Specifications Manual
31
•
In the “Transmit CD” column, “
” means “Transmit check digit” and “X” means “Do
not transmit check digit.”
•
In the “Calculate CD” column, “
” means “Calculate check digit” and “X” means
“Do not calculate check digit.”
•
“— “ means “not supported.”
•
In the “Prefix” column, “—“ means “there is no prefix setting.”
10.3. Default Settings 2: Read Options, Trigger, Buzzer
Item Default
Setting
Setting the number of characters
Fixed length OFF all codes
Read mode
Multiple read
Multiple read reset time
500 ms
Add-on wait mode
500 ms
Multiple label read
Disable
Multiple column read
Disable
Default option
([X0] setting)
Read 1 times, redundancy = 0
Redundancy
Other options
([X1 .. X3] setting)
([BS .. BW] setting)
Read n times, redundancy = n+1 for the following
symbologies and lengths:
●
Code 11 with length <= 5
●
Code 39 with length <= 5
●
IATA,Industrial 2of5, Interleaved 2of5 with length <= 8
●
Matrix 2of5 (& Chinese Post), Scode with length <= 8
●
MSI/Plessey with length <= 4
●
NW-7 (Codabar) with all lengths
Trigger switch
Enable
Trigger repeat
Disable
Auto trigger
Disable
Read time
2 seconds (when trigger enabled)
Margin check
Normal
Buzzer duration
50 ms
Buzzer tone
Single tone (3 kHz)
Buzzer loudness
Maximum
Buzzer transmission
Before transmission
Startup buzzer
Enable
Good read LED
Indicator duration 200 ms