OPTICOM OPERA Broadcast, User Manual

Page: 56 / 204

C H A P T E R 4 : G E T T I N G T O K N O W T H E O P E R A ™
F R A M E W O R K
50
Figure 4.20:
OptiCall™ Expert View
While in the Telephony Standard View, the termination side was always
sending the speech file. The Expert View allows for both sides independently
the selection if a speech file shall be sent and/or received.. You can select this
with a check mark besides
Transmit
and
Receive
for both interfaces separately.
With the
Call Options
select
•
How many consecutive interfaces are to issue a call (Bulk Call ) and
•
How often each call shall be repeated (
Repetitions
).
If
Bulk Call
is selected and 10 entered for
No. of Consec. Lines
, then the calls
will be issued from the interface selected under
Origin
, plus the next 9
interfaces and the calls will be terminated on the interfaces selected under
Termination
plus the next 9 consecutive interfaces. To distinguish the recorded
files, -Bulksetxx will be appended to the file name, where xx is replaced by a
number indicating the offset to the first originating interface.
All of the above may be repeated several times by checking Repetitions and
entering the desired number of calls under Total No. of Calls . The resulting files
will have a –xx appended to their file name, where xx is the index of the
repetition, e.g. xyz-2-line0.wav for the second repetition of a call on line 0.
With the settings under
Active Call Options,
adjust how often the speech file is
played and recorded during each individual call, before the call is cleared
again. If
Repeat Recording
is checked, enter how often the data acquisition
shall happen and how many milliseconds delay between the recordings shall