OPTICOM OPERA Broadcast, User Manual

Page: 32 / 204

C H A P T E R 3 : I N S T A L L A T I O N A N D S E T U P
26
All OPERA™ systems come with an ethernet port that may be used to connect
the system to a data network. As default, the OPERA™ system uses a fixed IP
Address. Please consult your network administrator before attaching OPERA to
a LAN.
Note:
Do never delete the TCP/IP protocol! It is required for proper
operation of the system.
For the setup of the audio interface board or the telephony board, please refer to
the corresponding section in Chapter 5 or Chapter 6, respectively.
3.2.2 Portable PC Version
Unpacking the System
After unpacking the system, check the delivery for completeness first . The
delivery should include the following parts:
•
Portable industry type of computer system with integrated 15" TFT
display.
•
Keyboard.
•
Power cord.
•
One or two audio multi cord connectors with cables
(Systems equipped with audio boards only).
•
Two phone splitter cables with three RJ-14 connectors each
(OPR-101-xxx-W telecommunication version only).
•
One dongle (may be attached to the printer port already).
•
One PEAQ Sample CD (systems with installed PEAQ algorithm
only).
•
One System Recovery CD (for shipments after after fall 2000)
•
This manual.
•
Windows NT CD-ROM and manual.
•
Additional documentation and/or software may be included,
depending on the version of the system.
IP / LAN Concerns