Installation
STEP1
Plug the AC/DC adapter to AC inlet and connect to receptacle on the
product.
STEP2 (HDMI)
Connect HDMI source to HDMI input port of HDMS-200 with HDM cable. If
necessary, connect the audio cable to audio jack.
STEP2 (DVI)
Connect PC or DVI source to DVI input port of HDMS-200 with DVI cable. If
necessary, connect the audio cable to audio jack.
Note.1
Please see the D/P switch function as below.
STEP3
Connect SDI display to SDI output port of HDMS-200 with SDI coaxial cable.
Note.2
HDMS-200 has two (2) SDI outputs.
Note.3
HDMS-200 does not have scaling up/down feature. It just converts
HDMI or DVI to SDI format with same resolution and refresh ratio.
1-4 Installation
Firmware update
STEP1
Please
“Off” D/P switch No.2 to set the firmware mode. Then, plug in the
adaptor.
STEP2
Connect Service port of New HDMS-200 and PC using a download cable.
STEP2
STEP3
Install the Flash Loader Demo file.
STEP4
Check the PortName and Click the Next button as below.
1-5 Firmware update (continued)
