USER MANUAL
HDMI MATRIX ROUTER : OHM-88
OHM-88 Manual
Page 22
1) Press
FUNCTION
key
– LCD will display EDID Read/Write:
=========Function Mode========
EDID Read/Write
IN : 1.2.3.4.5.6.7.8
OUT: 1.2.3.4.5.6.7.8
2) Configure as shown below:
=========Function Mode========
EDID Read/Write
IN : 1.2.3.4.5.6.7.8
OUT: 1.2.3.4.5.6.7.8
[Note] If a source is connected to two or more different displays, assigning the lower
resolution EDID to Input port EEPROM is highly recommended. Assigning higher
resolution will show
‘OUT OF RANGE’.
3) Press
ENTER
to save.
[Note] EDID setting is valid until a new EDID setting is processed - even though the
OHM-88 is powered on and off repeatedly.
4) To configure Input-Output, press
CREATE
; current Input-Output configuration will
be displayed.
========= Create Mode ========
I: 1 2 3 4 5 6 7 8 N
O: 1 2 3 4 5 6 7 8 M
Where
N
is
N
ot defined for the monitoring,
M
.
5) Press Input button
1
(Green LED is on)
– LCD displays:
========= Create Mode ========
Input Channel NUM.: 1
Out: 1
New:
Press Output 1 and 4 (number
1 and 4)
as the selected outputs for the given Input.
Press
ENTER
key and then turn back to the
user mode
.
[Note] Specific Input can be connected to multiple Output channels. However, one Output
channel cannot share multiple Input channels.
Repeat above process 4 to 5 for other Input channels.
Press
PREVIEW
key to review newly saved Input-Output configuration;
========= Preview Mode ========
I: 1 2 3 4 5 6 7 8 N
O: 1 2 3 4 5 6 7 8 M
[Note] Pressing ENTER key completes the Input-Output configuration.