USER MANUAL
HDMI MATRIX ROUTER : OHM-88
OHM-88 Manual
Page 15
The Input 2 button decreases the number.
Input 3 and 4 buttons moves the Under Bar left and right.
2.6.8
PORT NUMBER: press FUNCTION eight times
The Under Bar mark represents selected and activated.
Pressing Input 1 button repeatedly changes the selected number from 0, 1, 2...9.
The Input 2 button decreases the number.
Input 3 and 4 buttons moves the Under Bar left and right.
=========Function Mode========
Port Number
Old Data: 03000
New Data: 03000
Factory setting is 03000.
Press
ENTER
button to complete the process and return to the
User
mode
.
2.6.9
FACTORY MODE: press FUNCTION nine times
Press
ENTER
to reset and restore factory default settings.
2.7 Serial Communication
2.7.1
HyperTerminal
OHM-88 provides command line interface through serial port, RS-232.
Hyper Terminal is an effective serial emulation software to communicate with
OHM-88 when Microsoft Windows operating system is used to control OHM-88.
Hyper Terminal connection procedures:
1) Connect the OHM-88 to a PC as described in section RS-232 Control.
2) Select Start > Programs > Accessories > Communications > HyperTerminal
