Welcome!
Congratulations on your purchase of the M1-3R2VI-DU, Optical Dual Link DVI
Module. This manual contains information that will assist you in installing and
operating the product.
Product Description
The M1-3R2VI-DU module offers 100meters extension of dual link high-
resolution digital graphic data over fiber, directly connected between PC and
displays, supporting dual link DVI. Two boxes, located one by the PC and the
other by the display are connected to each of them with a 1.0 m dual link DVI
copper cable. Between two boxes, 7 channels (R, G, B, Clk, R2, G2, B2) of
graphic data enables to be transmitted over the 4 LC single or multi-mode fiber
bundled cable and the Digital Display Channel (DDC2B) interface is performed
over a CAT5e cable, so called as DDC cable, which has RJ-45C connectors.
The M1-3R2VI-DU also provides 2km extension over 4 single mode fibers
using virtual DDC mode without CAT5e connection. The EDID (Extended
Display Identification Data) in a display can be read and restored by just
plugging once transmitter to the display. This
Self-EDID programming
feature
makes the installation of M1-3R2VI-DU easier and more flexible at any variable
resolution display systems.
For your convenience, Factory EDID default is set to WQXGA (2560x1600).
Shipping Group of
M1-3R2VI-DU Optical Dual Link DVI Module
Tx and Rx boxes:
One (1) Transmitter (Tx) Box and One (1)
Receiver (Rx) Box.
Two (2) dual link DVI copper cables:
1.0m
AC/DC power adapter:
One (1) +24V unit
User’s Manual
Option: DDC cable (UTP for LAN) with RJ-45C
.
Option: 4 LC Patch Cord fiber bundled cable (Single or Multi
mode glass fiber)
.
Option: Two +24V AC/DC power adapters are required for virtual
DDC.
1-1 Welcome, Product Description
System Requirements for Setup
Hardware requirements
You have a Media Receiver or a graphic controller card with a
Dual link port in your Windows/Mac (Mac is option), or SUN
system. It should support the maximum graphic resolution
feature of the display to be connected.
In case of using a computer, no special memory size, CPU
speed and chipsets are required.
Proper initial trial of the entire platform with its application using
a short length copper cable is recommended prior to install with
the optical link.
Software requirements
No special needs, if the Dual link graphic controller and display
peripheral are operational with the platform’s OS and
application.
AC/DC Power Adapter Technical Advisory
Direct DDC: One power adaptor is required to supply power to both
modules of Tx and Rx over the CAT5e cable by plugging the power
jack to either of their power plugs.
Virtual DDC: Two power adapters are required to supply power to
Tx and Rx module due to no use of the CAT5e cable for DDC.
Figure 1 – Overall Optical dual link DVI Module
1-2 System Requirements for Setup
