Welcome!
Congratulations on your purchase of the
Express All-Fiber
DVI
M1-1000
(Digital Visual Interface) Cable. This manual contains information that will
assist you in installing and operating the product.
Product Description
Shipping Group
M1-100x Optical DVI Cable:
One (1) unit
+5V AC/DC power adaptor :
One (1) unit (If required one more
power supplying adaptor for Tx module, it’s optional).
User’s Manual
Figure 1 – Express All-Fiber DVI Cable System
1-1 Welcome, Product Description
System Requirements for Setup
Hardware requirements
You have to have a DVI graphic controller or card having a DVI
port in your PC, SUN or Mac systems. It should support the
maximum graphic resolution feature of displays to be
connected.
No special requirements memory size, CPU speed and
chipsets, if you’ve already properly installed your DVI graphic
controllers or cards.
Software requirements
No special restrictions, if you’ve already properly installed your
DVI graphic controller in your OS.
AC/DC Power Adapter Technical Advisory
The M1-1000 is designed for its Tx module to use +5V internal
power supplied through a DVI pin (#14) from the graphic card. For
ease of use or safety, the Tx module has a power auto-switching
circuit to protect from plugging the external power while powering
through DVI pin from the graphic cards.
However, its Rx module requires one ex5V AC/DC power
adaptor to drive. To plug the power into one of two modules makes
the other supplied over the hybrid cable.
1-2 System Requirements for Setup
