© 2021 Opticis Co., Ltd. All Rights Reserved
Revision 1.2. Feb 2021
Opticis Locations
OPTICIS HQ
Opticis Co., Ltd.
3F, 305, Sanseong-daero,
Sujeong-gu, Seongnam-si,
Gyeonggi-do, 13354
South Korea
Tel: +82 (31) 719-8033
Fax: +82 (31) 719-8032
For order support, please contact your Distributor or Reseller.
For technical support, check with the Opticis web site www.opticis.com or
contact
Connection with BR-500
By using BR-500,
19” 1RU multi-mounting rack, users are allowed to use
DPFX-250-TX up to 8 units with one power supply only. BR-500 has one
separate RJ45 Port which allows the connection through LAN cable. This
connection to GUI enables the access to the current power status of
individual module and also allows to turn on/off the power of the device. By
using premium graded DisplayPort 1.2 copper cables, BR-500 can extend up
to 3m (9.84ft) distance from the sources.
Figure 7
– Connection of DPFX-250 and BR-500
*Note: BR-500 is applicable to use with
Opticis DisplayPort 1.2 fiber-optic
transmitters ONLY.
Certifications
CE / FCC, Class 1 Laser Eye Safety
Certification of Eye Safety
This laser product is inside implemented by using 825, 850, 930nm LD
Transceivers, manufactured by Opticis Co., Ltd., which are all certified by
CDRH/FDA referred as classified in Laser Class 1 (IEC60825-1).
Caution
– Use of controls or adjustments or performances of procedures
other than those specified herein may result in hazardous radiation exposure.
1-9 Connection with BR-500, Certifications
