OPTICAL SYSTEMS DESIGN
DOC ID: 10115804
OSD2153P OPERATOR MANUAL
PAGE 7
1.3
TECHNICAL SPECIFICATIONS
TABLE 1: TECHNICAL SPECIFICATIONS
SPECIFICATION
PERFORMANCE
Electrical Data Interface
IEEE802.3i/802.3u/802.3ab 10/100/1000Base-T Ethernet
Electrical Data Rate
10, 100, 1000Mbps with energy detect, auto negotiate, auto MDIX
Jumbo Frame Support
10KB
Optical Data Interface
IEEE802.3z 1000Base-Lx/Sx or IEEE802.3u 100Base-Fx
Optical Data Rate
100Mbps or 1000Mbps
Operating Mode
Half or full duplex for 10/100
Full duplex for 1000
Flow control
Electrical Data Connector
RJ45
Controls
1.
100 or 1000Mbps on fiber
2.
Link Loss Forwarding: On or off
3.
Fault Detection: fiber only or copper and fiber
PoE
IEEE802.3af, IEEE802.3at and PoE++
Operating Mode
Alternative A & B (Pins 1/2, 3/6, 4/5, and 7/8)
Optical Port Connector
SFP (LC connectors for 2-fiber operation and SC for 1-fiber operation)
SFP Options
Short haul, long haul, single fiber operation, etc
Please consult OSD datasheet #10210000XX or contact OSD
Operating Temperature
-20
°
C to +75
°
C
Relative Humidity
0 to 95% non-condensing
Power Requirements
+46VDC to +57VDC @ 6W plus up to an extra 60W for PoE operation
(attached power device dependant)
>52VDC recommended for PoE+ or
≥
55VDC for 60W PoE
Power Connector
2 Way 3.5mm Terminal Block on the module
Dimensions (mm)
90W x 58D x 49H
Weight
0.3kg
1022153P03
