OPTi 619/5775, Assembly & User Instructions

Page: 12 / 27

Assembly Instructions
1
1
Step 4
Connect the Footplate Support
Bars (27L/R ) to the Crankshaft
(31) by fitting 1 x Shouldered
Bolt (49 L/R) and 1 x Wave
Washer (48) through the
Footplate Support Bar Pivot
Brackets (32) into the
Crankshaft and then fitting
1 x
ø13 x 19
Spring Washer
(71)
followed by 1 x Nylon Nut
(72 L/R) for each side to
secure the complete assembly.
Note:
Cap the N ylon N ut with 1 x
Round Cap (13) to each side.
One Bolt is supplied with a
RIGHT HAND THREAD for
the RIGHT HAND SIDE and
must be fitted by turning
CLOCKWISE. The other Bolt
is supplied with a LEFT HAND
THREAD for the LEFT HAND
SIDE and must be fitted by
turning ANTI-CLOCKWISE.
Ensure that the Shouldered Bolts
are fully tight before finally
securing the Nylon nuts.
Fit Round Caps (10) and (51) to
the Footplate Support Bar Pivot
Bolts.
ACW
CW