13
03
Output voltage
220Vac
230V (Default)
240Vac
04
Output frequency
50Hz (default)
60Hz
05
Solar supply priority
Charge battery first
(default)
Solar energy provides power to
charge battery as first priority.
Power the loads first
Solar energy provides power to the
loads as first priority.
06
Overload bypass:
When enabled, the unit will
transfer to line mode if
overload occurs in battery
mode.
Bypass disable
(default)
Bypass enable
07
Auto restart when overload
occurs
Restart disable
(default)
Restart enable
08
Auto restart when over
temperature occurs
Restart disable
(default)
Restart enable
09
Solar energy feed to grid
configuration
Feed to grid disable
(default)
If selected, solar energy is not
allowed to feed to the grid.
Feed to grid enable
If selected, solar energy is allowed to
feed to the grid.
10
Charger source priority:
To configure charger source
priority
If this inverter is working in Line, Standby or Fault mode,
charger source can be programmed as below:
Solar first
Solar energy will charge battery as
first priority.
Utility will charge battery only when
solar energy is not available.