41
Mains Charging Battery
This item is to set whether
inverter
will use AC mains to charge battery or not.
In some applications, you may need AC mains (Grid or Generator) to charge
the battery bank when PV power is not enough and battery capacity is low.
Select “Enable” so as to charge battery in this case; select “Disable” to skip this
function.
Set RS485 Address
This is to set RS485 address. The selectable address is from 1~200. Default
address is 1.
To know the detail of addressing of RS 485, please refer to section of
“Connecting RS485”.
Normal Settings
Normal setting is used to set the unit whenever you would like to. Its process
is similar to initial setting except operation flow as below.
Charging current while using Mains
Mains maximum current limits the charging current.
Charging power equals mains power minus load power.
