Opti-Med JM026-002, User Manual

Page: 2 / 4

LED EXAMINATION LIGHT
I. FEATURE
JM026-002 LED examination light is the new generation LED examination lamp we
manufactured. and its soft arm can adjust at any angle as DOCTOR’S requirement to ideal
illumination in examination
＆
operation.
II. TECHNICAL PARAMETER

Power voltage: ~220V±10%

Frequency: 50HZ

Bulb voltage: 24V

Power of bulb: 5W

Illumination: 10000LUX (at the distance of 50cm )

Color temperature: 3300±500K

Spot diameter: 100~150(mm)

Size of fuse: 1A
Δ
ATTENTION: Our company reserves the right of the change of product. Any models and
specification are subject to change without notice.
III. INSTALLATION
1. Before installation and modulation , firstly unpack and inspect if the outward appearance
of the lamp is good ; secondly check Model , Components , Quantity according to
packing list. If there is anything missing , please contact supplier immediately.
2. Connect the soft arm with lamp head with the tube.
3.
Put the tube into the lamp stand , and use the screws to fix.
IV. OPERATION
＆
MAINTENNANCE
1.
Connect the electric wire plug with the electric wire socket , and adjust the light-adjusting
knob to check if the illumination is on normal condition.
2.
‘ Power ’ on to check if the lamp can work well.
3. Please switch off the Power and clear the lamp after operation.
4. When replace the fuse , please cut off the power , screw the switch panel off ,then replace
the fuse.
V. PACKING LIST
1. soft arm with lamp head 1pc
2. tube. 1pc
3. lamp stand 1pc
4. fuse 1A 2pcs
6. Spanner 1pc
7. Certificate of test 1pc
8. MANUAL 1pc
www.opti-med.net
O pti -M ed
®