-1-
INSTALLATION INSTRUCTIONS
No. 59-1884-3
WIRINING (1)
SETTING
WIRINING (2)
PCB x2, Dummy battery x4, Battery lead (Red) x4 (Black) x4, Power cable x2
BATTERY COMMON USE UNIT
BATTERY LEAD (Red)
BATTERY LEAD (Black)
Warning
• Do not touch the ends of the red and black wires to avoid short-circuit.
• Be sure to place the dummy battery in the power supply case of
the wireless transmitter. Use of the battery included with the
wireless transmitter will damage the batteries in the detector.
Adjust DIP switch according to the low battery voltage of your
wireless transmitter.
1
2
Change the Normal/Test switch setting from Normal to Test and
check if the low battery signal is output from the wireless
transmitter.
3
After confirmation, put the setting back to Normal.
Check the power source of the wireless transmitter battery.
1
2
Change the Normal/Test switch setting from Normal to Test.
4
After confirmation, put the setting back to Normal.
3
If the power source of the wireless transmitter is 3.0 V,
test the DIP switch from L-1 to L-4 to check the setting for low
battery output.
If the power source is 3.6 V, test the DIP switch from H-1 to H-4 to
check the setting for low battery output.
Which is your wireless
transmitter power source?
–
+
Main unit
Back box
Wireless transmitter
CR123A
CR2
1/2AA
1/2AA
1
ON
2.3 V
L-1
2.2 V
L-2
2.1 V
L-3
2.0 V
L-4
Which is your
low battery voltage?
Which is your
low battery voltage?
3.0 V
2.6 V
H-1
2.5 V
H-2
2.4 V
H-3
2.3 V
H-4
3.6 V
Normal
Test
ON:
OFF:
Smart Line series
OPTION
Smart Line series
OPTION
BCU-4
Output voltage setting switch
EX
+
EX
–
Normal/Test switch
PARTS IDENTIFICATION
< When the low battery output voltage is informed. >
< When the low battery output voltage is not informed. >
-Share power source and low battery signals
between the main unit and the wireless trans-
mitter.
1
ON
2
1
3
ON EDG
2
1
3
ON EDG
2
1
3
ON EDG
2
1
3
ON EDG
2
1
3
ON EDG
2
1
3
ON EDG
2
1
3
ON EDG
2
1
3
ON EDG
Note>>
• It may take time for some wireless transmitters to
output the signal.
+
–
Power source
(+)
Red
(-)
Black
Green
(COM)
Blue
(N.C.)
Blue
(N.C.)
Purple
(COM)
Gray
(N.C.)
Green
(COM)
Low battery terminal
Purple
(COM)
Green
(COM)
Blue
(N.C.)
Gray
(N.C.)
(+) Red
(+) Red
(-) Black
(-) Black
BATTERY
